0

DIY Wristlet Keychain with Lobster Clasp // Easy method

The easiest way to sew a wristlet keychain with lobster clasp – no additional hardware needed. The cheapest and easiest method to sew this wristlet keychain!

It’s quick, it’s easy and the method will make your jaw drop!

Below you will find my step by step written tutorial with VIDEO instructions for all the visual learners.

We occasionally link to goods offered by vendors to help the reader find relevant products. Some of the links may be affiliate meaning we earn a small commission if an item is purchased.

How to make a wristlet keychain with lobster clasp

Supplies and tools

• cotton fabric – 7.5 x 7.5cm (3 x 3″)
• webbing – 2.5 x 30cm (1 x 12″)
• 2.5cm (1″) wide lobster clasp
• matching thread
• scissors (or rotary cutter and a cutting mat)
• ruler or measuring tape
• iron and ironing board
• sewing clips or pins

Follow us for free patterns & tutorials! [easy-profiles]

How to Sew a wristlet keychain with lobster clasp

Watch the diy wristlet keychain with lobster clasp video first and then follow the written step by step instructions below.
Please enjoy and don’t forget to Like and SUBSCRIBE over on YouTube to be kept up to date with new videos as they come out.

wristlet keychain with lobster clasp VIDEO TUTORIAL

INSTRUCTIONS:

STEP 1:

Cut a piece of webbing 30cm (12″) long. Cut a square of fabric 7.5 x 7.5cm (3 x 3 inches)

STEP 2:

Place the fabric square with right side up on your worktop. Place the webbing on top (right side down if both sides are different) flush with the raw top edge.

STEP 3:

Fold the sides of the fabric on top of the webbing. Pin.

STEP 4:

Stitch the top using a 6mm (1/4″) seam allowance.

STEP 5:

Unfold the fabric so the right side is visible.

STEP 6:

Insert the lobster clasp and slide it to the middle of the webbing.

The clasp should be at the same side where the fabric without the seam is.

STEP 7:

Fold the other end of the webbing to meet the other raw end of the fabric piece. Right side to right side of fabric without seam

STEP 8:

Fold the fabric so it wraps around the webbing as you did previously. Pin.

STEP 9:

Stitch using a 6mm (1/4″) seam allowance.

STEP 10:

Pull the webbing on both sides of the fabric to straighten fabric.

Push the lobster clasp in the middle of the fabric.

STEP 11:

Fold the fabric again to the opposite side so that the seam remains inside.

STEP 12:

Using a zipper foot stitch a square right next to the lobster claps, along the sides and along the webbing.

Voila! The wristlet is ready! Attach your keys and you are ready to go

Do you like this? Pin for later:

 

Wanna be friends? Click HERE and follow me on Pinterest

RELATED: